Annealing Black Binding Wire Winding Machine

Annealing Black Binding Wire is very soft and annealed.

Binding Wire is used for tying reinforcement bars before concrete is cast. This soft nature of the binding wire enables it to twist and tie properly.Annealed Black Binding Wire used for bundling steel bars in construction.

There are two types of tie wire for binding steel bars, galvanized steel wire and annealed black binding wire. Generally, annealed black binding wire is used more frequently. The commonly used specifications of tie wire are 18 to 22. When the diameter of the binding steel bar is less than 12 mm, the 22-gauge wire should be used; when the diameter is 12-25 mm, the 20-gauge wire should be used.

When it is more than 25 mm, it is better to use No. 18 wire. The length of the tie wire should not be too long or too short. If it is long, it will cause waste, and if it is short, it will be inconvenient to operate. The length of the tie wire is generally in order to make the wire tie hook twist 2-3 turns, and then leave about 10 mm. Since the ties are often supplied in discs, it is customary to cut them at a fraction of the circumference of each disc. Many factories now use an annealed black wire winding machine for the convenience of customers, and rewind it into a small coil of 1KG or 1.5KG for easy access.

Our company provides annealed black wire winding machine, galvanized binding wire winding machine, double anealed wire twisting machine, multi-strand balck annealed wire stranding machine. These machines are very compact and economical in design. The machines are good choices for binding wires manufacturers.

Please contact us if you have an inquiry.