Why has the X90 become a classic best-selling model

Why does the high speed nail making machine  X90  account for over 90% of market sales?

Let's see the growth experience of X90 togeghter.

At present, there are many traditional nail making machines used on the market, and their structural principle is single mode single punch, with a relatively large stroke. The shear is made by the machine and the mold gravity impact.

1、 The journey is relatively large, with a speed of 150-250 pieces/minute;

2、 Repeated impact by gravity results in unstable nail making quality, which can easily lead to adverse phenomena such as aircraft heads, large and small caps, and a high scrap rate of raw materials; At the same time, the mold is prone to damage and needs to be shut down for maintenance and replacement;

3、 Due to its structural factors, it is suitable for driving heavy nails, such as nails with long wire diameter, large diameter, low quality requirements, and relatively low production capacity requirements.

With the increasing demand for market production capacity, it is difficult to recruit nail makers and orders cannot be completed in a timely manner

To promote the rapid development of the cold heading industry, the R&D team has begun to develop more stable and faster nail making machines to meet market demand. Starting from 2013, various data inquiries, material testing, structural principles, and electrical principle analysis were conducted. In 2016, this X90 was officially released.

The third generation of high-speed nail making machine X90 produces a rocket speed of 760 units per minute, which is more than three times higher than traditional nail making machines. At the same time, there has been a significant breakthrough in nail quality (such as irregular nail caps and continuous shear of nail rods).

The sixth generation of X90 has obtained a national patent (double mold and double punching), with a small stroke, two dies, and one molding.

The defect rate of nail production should be controlled below 0.5%, the scrap rate of raw materials should be reduced by 80%, and the cost of tool use should be reduced by half.

In order to meet the market and customer needs, truly help customers solve problems, improve the effective stability of equipment, reduce complexity, and simplify, the R&D team has strengthened key institutions, matched auxiliary structures, and adjusted them to improve overall balance and stability to a new level.

At the same time, attention has been paid to environmental protection, oil pollution recovery, energy conservation and noise reduction through redesign and improvement. There are three styles: economy style, simple environmental style, and international environmental style.

The tenth generation innovative design features a variable stroke at the wire feeding and returning point, simplifying the wire feeding operation. It makes it easier for the operator to load and replace the mold, greatly reducing the requirements for personnel and reducing labor difficulties.

The production rate of nail making quality is close to 100%, and the quality problems of uneven cutting of nail rods, uneven nail caps, and uneven thickness of nail caps are completely avoided. Comprehensively upgrade and consolidate from eight aspects: raw material utilization rate, nail quality stability, production efficiency, tool and mold cost, human-machine ratio, machine service life, energy conservation and environmental protection. Truly enabling customers to efficiently and easily make nails, with ease of use and peace of mind!