Coil nail production line

Firstly, from the perspective of the raw materials used by the nail manufacturers, they currently use scrap steel bars or new plate elements for processing; The equipment used in the roll nail production line is composed of wire drawing machines, nail making machines, nail milling machines, wire rolling machines, roll nail machines, etc.

Start with wire drawing and find some wire or scrap steel bars or coil elements; The disc element has a continuous wire drawing machine. Fast speed, multiple sets of waste steel wire drawing machines can be configured according to production needs, mainly for section by section waste steel bars. Without welding, the pulled steel bars can directly produce the required round nails.

After pulling out the required diameter and model of wire, pay attention to the use of wire drawing powder, which is a crucial part of the wire drawing process; You can directly automatically feed, nail, discharge, and produce intact nails on the nail making machine. These nails are then concentrated for polishing with a polishing machine barrel, which comes with wood chips; The polished nails are poured into the wire rolling machine for wire rolling, with a normal speed of around 1300 pieces per minute. There is now a wire rolling machine on the market with a speed of 2000 pieces per minute, which can greatly improve efficiency. The main parts of the wire rolling machine are the wire rolling mold and vibration disc; After twisting the thread, it can be directly rolled and nailed, which is composed of a group of individual nails and connectors arranged at equal intervals with the same shape;

A rolling nail machine is a machine that turns loose nails into rolling nails, mainly for the connection of welding wires. There are about 300 nails in a rolling nail, and the specific quantity depends on the size and model of the nails. The normal model of nails is: nails with a diameter of 2.0-3.8, a length of 25mm -150mm, and nails exceeding this range are basically not used. The production capacity of each model is also different, and the corresponding machine model also varies, At present, the market has relatively high requirements for coil nails.

The equipment used throughout the production process of rolling nails, from waste steel bars to finished rolling nails:

Wire drawing machine - nail making machine - milling machine - wire rolling machine - nail rolling machine

The price of the wire drawing machine is the most expensive, while the price of the polishing machine is the cheapest. The nail making machine has the highest selectivity. Currently, there are 5 types of nail making machines available on the market, among which the ZDJ-X90 nail making machine has the highest cost-effectiveness and the most stable quality. At present, it is still a popular and cutting-edge product in the market. There is only one traditional type of nail rolling machine available in the market, and there is currently no professional nail making machine manufacturer that can upgrade it.