During the use of traditional nail making machine, it is inevitable to encounter various problems. 

Once there is a problem with the nail making machine, it will affect normal production. 

If we want to ensure the quality of nails, we need to master some methods to handle nail making machine failures. Let's learn about common solutions to traditional nail making machine failures together.

During the use of traditional nail making machinery, there may be problems with nail tip cracking.

 If this situation occurs, we should promptly shut down the equipment, replace the iron wire, or re temper the iron wire to produce new iron wire, and clean the garbage in the garbage bin to prevent the problem of garbage mixing.

Another common problem is that the nails produced have a certain degree of inclination. The reason for this is likely due to a deviation in the degree of wear of the blade from the left to the right, which resulted in a mismatch between the left and right when making nails. At this point, we need to regrind the blade in a timely manner, and adjust the operating height and reasonable position of the shell to ensure the normal operation of the nail making machinery.

Of course, there may be other issues encountered during actual operation. Regardless of the situation, we need to first investigate and identify the specific cause, and then handle it according to the actual situation. Only in this way can the nail making machine maintain normal operating conditions and better implement nail making operations.

If you want to completely solve the problems that occur in the production process of traditional nail making machines, we recommend using our high-speed nail making machine. Our nail making machine effectively solves the problems of long and short nails, eccentric caps, varying sizes of nail caps, aircraft heads, dome nails, and nails with limited quality due to the structural limitations of traditional nail making machines, the technical level of nail drivers, high defect rates, and high waste.