The quality of nails determines market competitiveness and is an absolute guarantee for enterprises to obtain high-quality orders. 

Long and short nails "are common defects in the traditional nail making process. 

What losses will be caused by long and short nails? The most important thing is to cause sticking during the production of coil nails.

If stuck, it will cause production losses:

1. Sticking can cause waste of raw materials;

2. Repair the nails, resulting in a loss of production efficiency;

3. Frequent clamping reduces the service life of the mold and increases costs;

Then how to prevent long and short nails? There are four tips:

1. After production is completed, please reset the machine :

   
   

   Push the handwheel inward to reset the machine
   

    2.After the shift change, clean the position of the guide rail.

   3. Check the spring tightness once a month based on the actual production status

   4. The roller bearing of the straightener is too tight, readjust the alignment.

When using a high-speed nail making machine, pay attention to "resetting" and "cleaning", "checking" and "straightening" to avoid the occurrence of long and short nails.